Frequently Asked Questions
How do I figure out how much product I will need?
You need to measure the length, width and depth. Then calculate the following formula:Length x Width x Depth = ____ you then divide that number by 27 and that gives you the cubic yards you need.
How much does a cubic yard cover?
A cubic yard will cover a 10x10 area approx. 2 1⁄2 deep, 100sqft.How do I know how many bags it will take to cover 1 cubic yard?
It, of course, depends on what type of product you are using. Our general rule of measurement (2" deep) is:2cft bags, 13bags to cover 100 sq. ft
3cft bags, 9 bags to cover 100 sq. ft
What product is recommended to use for paver installation?
We recommend using concrete screening or limestone screening for the base. Once you get your pavers placed, you can brush sand over the top to fill in the gaps between the pavers.
No Job is Too Big or Too Small, We do it all!
If you have any others questions, please free to give us a call at (813) 672-8836.You can also visit our yard at 13511 Balm Riverview Rd., Riverview, FL 33579